Friday, February 3, 2012

My cd/dvdw Ts-H652L optical drive recognizes and plays cd's but not dvd's.

I"m using Windows XP. The drive occasionally recognizes and plays a dvd, but maybe 1 time in 10. I've rolled back, and tried to update with no luck.

The laser pickup unit of the DVD player may either be dusty or dirty. Try to clean it, by inserting a lens cleaning disc into the player and play it until it pays completley. Then check it out.
If this do not help you, the laser pickup unit is faulty. It will be best to muy a new Player, rather than try to repair it, especially to computer DVD players. OK.

that it will be easiest and profitable than repair these kinds of system components. I've tried to rapair my own dvd writer to my system, but not suceeded. That is why I recomended you to repalce it as a unit. My system has two of them, LG and Samsung . Both are DVD ROM; re-writable. I recomend you to buy an LG brand.

1980 Suzuki GS 550 L has no midrange power?

I have a 1980 Suzuki GS 550 L as my winter project. First thing I did was clean tank out and kreem it with tank liner. Then rebuild the carburetors top and bottom end of the carbs. I soaked thejets in carb cleaner and blew them out with compressed air. Got everything back together again. Bike started but has no midrange power if I twist the throttle fast it hesitates. And when the rpm's do get up and I let go the throttle the rpm slowly come back down.


Please take out your spark plugs and check their electrode condition. If they are black then you have a very rich mixture. That could be a faulty ignition spark (weak) or clogged airway in the air filter housing. Also check the carb's needles if they are adjustable in height, pute them in the middle scale. I believe when you were cleaning the carbs, you took out the pilot screw and the idle jet and cleaned that circuit thoroughly.
If they are white then your mixture is lean (probably your intake system sucks extra air from the intake collars where you plug the carbs on to the cylinder head or from the collars that connects the carbs to the air filter housing)


Also check the muffler bearing.


how to fix error loading operating system on toshiba satelite m115 laptop?

Go into the BIOS and check if the BIOS detects the hard disk. If not then most likely the hard disk has failed and the hard disk needs to be replaced then Windows needs to be installed on the new hard drive plus the Toshiba M115 device drivers and your programs/software.


How to open dust container on Dyson DC07 Bagless Upright Cyclonic Vacuum

To empty your DC07, please follow the steps shown in our online support guide:

http://support.dyson.co.uk/support/dc07/dc07-standard/maintaining-your-dyson-machine/clear-bin-emptying

If you have any further questions about using or maintaining your DC07, please call Dyson Helpline free on 0800 298 0298 (UK), or 1-866-693-9766 (US) so you can get further assistance.


hp nx 6325 laptop instruction manual?

Get into these links. If you feel aany difficulty in downloading the manual to your device, inform me by comment box, along with your email address. I've the downloaded manual to your device, and I'll send a copy of it to you by return mail. I can't send it to you by this window, as it does not allow me to upload PDF files by it. OK
www.helpowl.com
WWW. retrevo.com

try this link
http://www.manualowl.com/m/Hewlett-Packard/Nx6325/Manual/27717

replace low beam head lights on buick allure

Open hood, look on top of head light assm, you will see a bolt or screw, these hold assm in. remove, and pull out assm. Turn lock collar, remove old bulb, install new, BUT DO NOT TOUCH GLASS END OF BULB WITH YOU HAND, the oil from your skin will make the bulb explode when it is heated.


low beam headlight not coming on drivers side?

low beam headlight not coming on drivers side..2002 buick regal. there is power there and have tried a new bulb.. even switched the bulb from passenger side and it wont work on the drivers side.


If you know that you have power, then the ground is bad. There should be a ground wire at the body near the harness for the headlights.

Power is power, ground is ground. If the bulb is getting power and ground it has to work, (if its good) Did you use a test light? if so, put the clip on the positve of the battery and probe the ground wire, it should light the test light.